
Move over the image to inspect details, or click to enlargeTap the image to inspect details
Single-component screw valve — Low Flow
- Model
- SV01 / SV05 / SV15 / SV30
Volumetric metering, brushless motor/servo drive, supports infinite cycle continuous metering of glue, suitable for single-component glue, used in sealing, potting, and filling processes.
Explore this part of the adhesive process
Product features
- Volumetric metering, motor drive, high glue dispensing accuracy and stable flow.
- Supports infinite loop continuous glue dispensing, suitable for long-term mass production operations.
- The pulsation of glue discharging is small, glue cutting is clean, and glue dripping and wire drawing are suppressed.
- Compatible with various single-component adhesives such as silicone, epoxy, and thermally conductive adhesive.
- It has a compact structure and flexible installation, and can be integrated with robots and glue filling equipment.
Technical specifications
| Model | SV01 | SV05 | SV15 | SV30 |
|---|---|---|---|---|
| Volume per revolution (mL/rev) | 0.01 | 0.05 | 0.15 | 0.3 |
| Minimum dispensing volume (mL) | 0.0006 | 0.0031 | 0.0094 | 0.0188 |
| Minimum speed (rpm) | 10 | 10 | 10 | 10 |
| Maximum speed (rpm) | 120 | 120 | 120 | 120 |
| Minimum flow (mL/s) | 0.1 | 0.5 | 1.5 | 3 |
| Maximum flow (mL/s) | 1.2 | 6 | 18 | 36 |
| Supply pressure (bar) | 6 | 6 | 6 | 6 |
| Metering pressure (bar) | 15 | 15 | 15 | 15 |
| Applicable viscosity (mPa·s) | ≤500 000 | ≤500 000 | ≤500 000 | ≤500 000 |
| Rotor material | SUS304 | SUS304 | SUS304 | SUS304 |
| Stator material | FKM | FKM | FKM | FKM |
| Overall dimensions (mm) | 36x43.3x262.3 | 36x43.3x262.3 | 36x43.3x298.8 | 36x43.3x298.8 |
| Weight (g) | 580 | 620 | 620 | 620 |
| Operating temperature | 10℃-40℃ | 10℃-40℃ | 10℃-40℃ | 10℃-40℃ |
| Material temperature | 10℃-40℃ | 10℃-40℃ | 10℃-40℃ | 10℃-40℃ |
| Inlet connection | G1/8 | G1/8 | G1/8 | G1/8 |
| Notes | Luer connection | Luer connection | Luer connection | Luer connection |
Technical specifications for the listed model. For application engineering, share your adhesive datasheet, part drawing and production requirements.


